2001 Carver 39' _{(11.89 m)} 396 Motor Yacht

Standard Equipment

Machinery

MerCruiser's 8.1S HO 

ZF Hurth Drives

Risers (2015) 

Manifolds and Elbows (Stainless Steel) (2019)

Dripless Shaft Seals

Volvo Bow Thruster

Kohler 10KW Genset

Trim Tabs with Automatic Trim Controls and Indicators

Marine Air Conditioning with Reverse Heat and Remote Thermostats x3

Hot Water Heater 

Various Bilge Pumps

Electronics

Raytheon combination GPS/Plotter and radar. 

Raytheon Instrument Displays Depth & Temperature

Samsung TV's Saloon and Aft Cabin

Raytheon VHF Marine VHF Radio

Compass

Battery Chargers x2

Batteries: 

50amp Shore Power Cable 

30amp Shore Power Cable

Central Vacuum

Stereo with CD and Sirius Receiver

Galley

Nova Kool Fridge

Nova Kool Freezer

Princess 3-Burner Countertop

Bridge Ice Maker

Sharp Microwave and Convection Oven

Master Stateroom VacuFlush with Stand Alone Shower

Aft Berth VacuFlush with Shower

Black and Decker Coffee Maker

Additional Equipment

Aft Deck Seating Canvas with Strataglass and Sunshade

All Custom Named Boat Soft Good (towels)

Flybridge Mooring Cover

Custom Winter Storage Cover

Bridge Canvas with Strataglass

Sun Deck Pads (2020)

Aft Deck Chairs

Reclining Couches

Manufacturer's Descriptions

Introduced in the 2000 model year, the 396 Motor Yacht was an overnight success. This aft cabin motor yacht has the aggressive styling of an express cruiser. As well, the 396 has changed the rules concerning aft cabin styling. The unique raised walk deck design has allowed design changes that give the 396 a wider cabin - much roomier than one would expect. Adding to its appeal, the cabin living space has been combined into a spacious, open "great room" with plenty of salon seating and space for all sorts of extra amenities, like an end table, TV and VCR. Two luxurious staterooms and two head compartments provide welcome privacy, with the forward head compartment providing separate head and shower compartments.

Solid fiberglass hull bottoms with Knytex substrates and Vinylester barrier coat. Hand-laid, molded fiberglass components featuring composite laminate hullsides, decks, and cabintops. Molded fiberglass stringer system. Structural engine mountings - reinforced stringer mountings with gusseted, angle steel plates. Fabricated aluminum floor frames with stainless steel stanchions. Cherry wood bulkheads, cabinetry, and trim throughout cabin, with high gloss finish. Tinted, tempered safety glass frameless window systems. Unitized deck and cabintop construction with integral aluminum truss reinforcement in cabintop structure.

AFT DECK - 73 ft2 (approx.), integral to deck, self-draining. Cleats (2) - 10" stainless steel, through-bolted through aluminum backing plate, inboard-mounted with stainless steel hawse pipes. Command bridge stairway - integral to deck with stainless steel handrail. Electronics arch - custom aluminum with acrylic polyurethane surface coating and UV protection. Electronics arch access plates (5) - corrosion-resistant polymer attached with noncorroding screws and waterproof sealant. Grab rail - 25" stainless steel, across lockers. Handrail - 1.0" OD, stainless steel, around entire aft deck. Hardtop over entire aft deck. Lights (4) - courtesy, recessed, with exterior-mounted switch. Lights (2) - overhead, recessed, with exterior-mounted switch. Lockers (2) - upper and lower, double doors, interior stainless steel restraining rail. Stereo speakers (2). Transom door - aluminum, stainless steel hardware, with 22" grab rail across top. Wing doors (2) - secure open and closed, acrylic in aluminum frame, stainless steel hardware, provide access to the side decks. SIDE DECKS - Bow rail - 1.0" O.D., lineal-buffed, welded stainless steel, with additional intermediate rail amidships and forward. Bow rail stanchions - double-welded (inside and outside), stainless steel, anchored to aluminum backing plates laminated into deck. Cleats (4) - 10" spring, stainless steel, through-bolted through aluminum backing plate. Deck toe rail. Grab rail - stainless steel, over cabin windows, running length of cabin and above windshields. Rub rail molding - heavy-duty, stainless-steel insert. FORE DECK - Cleats (2) - 10" stainless steel, through-bolted through aluminum backing plate. Cleat - 10" stainless steel for anchor line, through-bolted through aluminum backing plate. Locker - in-deck, self-draining, for fender storage and anchor chain. Over-the-stem anchor roller.

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.