2001 Wilbur 34' (10.36 m) 34
Belfast, Maine, United States
Kingfisher
Kingfisher is a beautiful example of this well-respected Wilbur model. The current family is the original owner's and have maintained Kingfisher to a commendable standard.
Flag of Registry: United States
- Downeast
- Power
- Used
- Diesel
- Fiberglass Hull
- HIN/IMO: LSW34065F0001
| FEATURES: |
|---|
| one owner boat |
| recent upgrades |
| Notable Upgrades: Her recent upgrades include Garmin touch screen multifunction display, Garmin radar dome, reconditioned propeller and more. |
| Date Listed: 12/08/2023 |
Kingfisher offers fantastic value on today's market.
$ 297,000 USD
€ 274,074 Euros
$ 404,573 CAD
£ 230,988 GBP
Description
"The full bow is plenty buoyant, great for dealing with serious seas. The 34’s specially designed entry minimizes bow steering (digging in), common to some boats of this type. The salon and cabin reflect Wilbur Yachts’ attention to detail in both accommodations and craftsmanship." ~ Boating
Kingfisher is a beautiful example of this well-respected Wilbur model. The current family is the original owner's and have maintained Kingfisher to a commendable standard. This is a hard top version with hard sides and a soft back with roll up curtains. Her recent upgrades include Garmin touch screen multifunction display, Garmin radar dome, reconditioned propeller and more. Add to this bow thruster, bus heater, and open layout Kingfisher offers fantastic value on today's market.
Data Sheet
HIN/IMO: LSW34065F0001
Official Number: 1129854
LOA: 34' 4'' (10.46 Meters)
Type: Power- Used
Year: 2001
Beam: 12'
LWL: 32' 3''
Draft Min: 3' 8''
Heads: 1
Fuel Type: Diesel
Hull Material: Fiberglass
Fuel Tank: 208 Gallons (787.37 Liters)
Fresh Water: 80 Gallons (302.83 Liters)
Dry Weight: 15000
Multimedia
Engines
Engine 1
- Engine Make: Caterpillar
- Engine Model: 3126
- Engine Year: 2001
- Engine Type: Inboard
- Drive Type: Direct
- Power HP: 420.00
- Power KW: 313.19
- Fuel Type: Diesel
- Hours: 845.00
- Engine Location: Middle
Full Details
Vessel Details
Construction
"Semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8″ to 3/4″ at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity and weight reduction." ~ Wilbur Yachts
Hull
"This semi-displacement hull is solid hand-laid fiberglass of alternate layers of matt and woven roving. Thickness of the hull will vary from 3/8″ to 3/4″ at high rudder port bearings, which require extra thickness. The superstructure is made up of hand-laid fiberglass and utilizes an end grain balsa core for structural rigidity and weight reduction." ~ Wilbur Yachts
- Awlgripped Flag Blue topsides
- Awlgripped white boot stripe
- Green antifouling bottom paint
- Forward bolt-on spray rails port and starboard
- Aft bolt-on lifting rails port and starboard
- Bow thruster tunnel in bow
- (4) Through-hull fittings and seacocks on the wetted surface of vessel for various raw water intakes and discharges
- Stainless steel rudder and post
Electronics
Helm
- Garmin multi-function touch screen display
- Side power bow thruster controls
- Ritchie Powerdamp ships compass
Companionway
- Icom IC-M502 marine VHF
Electronics Mast
- Garmin closed array radar dome
- Shakespeare 8-foot 440 marine radio antenna
- Garmin GPS receiver antenna
Hull
- Depth transducer mounted port side amid ship
Deck
- Bright teak toe rails port starboard and aft with 3/4" stainless steel bull nose cap plate
- White decks with contrasting grey nonskid
Swim Platform
- Full beam teak swim platform
- Telescoping swim ladder mounted on swim platform
Cockpit
"The cockpit of this vessel spans from the transom, forward to the superstructure and has gray rolled non-skid for traction. Forward and on centerline is a 26” x 42” Anchor aluminum hatch cover to gain access to the aft bilge/lazarette. Aft and on centerline is a 8” stainless steel inspection hatch to gain access to the steering gear. On the port and starboard gunwales are various stainless steel fishing rod holders and deck fittings. There are teak combing boards and a removable teak boarding ladder.:" ~ Christian Adam Andrews SAMS SA - Accurate Marine Surveyors
- Stainless steel tubular bimini frame
- Blue Sunbrella bimini
- Bright teak coaming
- Bright teak boarding steps with stainless steel fittings port and starboard
- Stainless steel rod holders port and starboard
- Stainless steel hawse pipes port and starboard
- Stainless steel chafe rails on varnished teak toe rails
- Stainless steel 10" stern cleats port and starboard
- Cockpit shower aft port
- Washdown outlets
- Marinco 110 Volt shore power inlet
- Fiberglass dock box in cockpit
Weather Decks
- 10" Popup stainless steel cleats port and starboard
- Stainless steel diesel infill port and starboard
- Stainless steel water infill port and starboard
- Stainless steel waster out fill starboard
Coach Roof
- Stainless steel handrails port and starboard
- 21” X 21” Lewmar hatch
- (2) Stainless steel port lights on trunk sides port and starboard
- Solar vent
Fore Deck
- 1" Stainless steel bow rail
- Bright teak bow sprit with stainless steel anchor chain roller and channel
- Lofrans vertical mount stainless steel anchor windlass with foot switches
- Stainless steel open chocks port and starboard
- Deck washdown outlet
- 12" Stainless steel bow cleat on centerline
Pilot Salon Roof
- Painted Aluminum electronics mast
- Electronics (See Electronics)
- (2) Aft opening deck hatches
Pilot Salon
The pilot salon offers great protection without creating separation from the cockpit. With (3) rollup Sunbrella drop curtains with clear acrylic windows, this is a soft back version.
- Bright teak handrails overhead port and starboard
- (2) Overhead deck hatches with Bright teak trim
- (3) Fixed forward windows
- Vetus windshield wipers on outer port and starboard forward facing windows
- (2) Slide opening windows port and starboard
- Bright teak companionway doors with bright teak bifold top hatch
- Extra-large Yeti cooler
- Teak covered deck hatches
Helm Station
- Bright teak helm console
- Adjustable helm seat with arm rests
- Suite of Electronics (see Electronics)
- Caterpillar engine panel
- Engine throttle and gear lever
- Windlass breaker
- Remote windlass up/down switch
- Windshield wiper controls
- Fuel tank gauge for port and starboard tanks
Copilot Station
- Work surface forward with bright teak fiddle aft
- Adjustable helm seat with arm rests
- Bright teak footrest
- Teak grate
Cabin
Stepping down the companionway Kingfisher's interior features a Herreshoff style interior with white paneling offset by bright teak trim. The sole is teak and holly giving the interior a very bright and luxurious feal. Off to starboard is the head with stall shower, the sleeping quarters are forward with a traditional v-berth and the galley is aft of the v-berth to port.
Head
- Raritan electric head
- Single basin stainless steel sink
- Single lever pressurized freshwater mixer head
- Vanity mirror
- Access to back side of helm station
- Electrical closet
Shower
- Stall shower with curtain
- Pressurized freshwater shower wand with flexible hose and mounting bracket
- Molded bench seat
Berth
- Teak slat hull treatment
- Storage locker to starboard
- Reading lights port and starboard
- Upholstered v-berth cushions
- Storage below berth
Galley
- Princess 3-burner propane range with oven and broiler
- Shelf and locker storage above counter
- Single basin sink
- Single lever pressurized freshwater mixer head
- Nova Kool refrigerator
- Drawer and locker storage below counters
Mechanical Systems
- Caterpillar 3126 420 HP 6-cylinder turbocharged marine diesel engine SN# 1ZJ02193 with 845 hours
- Marine wet exhaust system
- Morse style shift and throttle controls
- 1 3/4" Stainless steel propeller shaft
- Hydraulic steering
- Side-Power bow thruster with 5-blade propeller in 7.5" fiberglass tunnel
- Heater Craft bus heater
Electrical System
12 Volt DC System
- Custom 12 Volt DC electrical distribution panel with volt and amp meter
- (2) 8D 1450 cold cranking amp batteries
- Engine cranking battery
- ProMariner ProNautic battery charger
- Alternator on engine
- Perko battery switch
Tankage/Fluid Systems
Diesel
- (2) 104 Gallon Luthe's Tanks Inc 5052 H32 aluminum alloy fuel tanks
- Primary dual Racor fuel/water separator fuel filters
- Secondary Caterpillar fuel filter
Fresh Water
- (2) Polyethene freshwater tanks located below cockpit sole (believed to be 40 gallons each)
- Flojet electric freshwater pump
- Accumulator tank
- Raritan 1700 Series hot water heater tank
Raw Water
- Electric raw water pump for foredeck and cockpit washdown
Sanitation
- Polyethylene holding tank
Safety Equipment
- LED running lights mounted on the radar mast
- All-round anchor light/masthead light mounted on the radar mast
- Transom light mounted on centerline of the transom
- Fireboy Xintex marine carbon monoxide detector
- Rule keel bilge pump with a Rule-A-Matic automatic float switch
- Rule-Mate 1100 GPH bilge pump
- Stainless steel claw style anchor with stainless steel swivel
- Galvanized chain and three strand braided rode
- Galvanized steel plow style anchor with braided rode
Represented by a Certified Professional Yacht Broker (CPYB)
A Certified Professional Yacht Broker (CPYB) is recognized as having achieved the highest level of industry accreditation, available only to fully-qualified yacht sales professionals. The CPYB program is administered by Yacht Brokers Association of America in partnership with Florida Yacht Brokers Association, Northwest Yacht Brokers Association, California Yacht Brokers Association, Boating Ontario Dealers, British Columbia Yacht Brokers Association and Gulf Coast Yacht Brokers Association.
The CPYB program is also endorsed by the Marine Retailers Association of the Americas (MRAA) Marine Industry Certified Dealership (MICD) program and leading yacht manufacturers as a key component of their own industry standards; the highest level of achievement for their member yacht sales professionals.
Experience & Validity
The CPYB designation is earned by eligible yacht sales professionals, who, after serving a minimum of three years as a full-time professional, have successfully completed a comprehensive written examination to validate professional competency.
Continuing Education
A CPYB is committed to their personal and professional development through continuing education, as mandated for CPYB recertification every three years.
Ethics & Standards
A CPYB adheres to, and is accountable to, a nationally recognized Code of Business Ethics and conducts yacht sales transactions in accordance with a stringent set of industry standards of practice.
Fiduciary Responsibility
A CPYB maintains a dedicated escrow/trust account to protect their client’s funds. A CPYB understands their fiduciary responsibility and obligations with respect to client funds.
Transaction Management
A CPYB uses proven, industry-recognized transaction documents, which fully and clearly describe all terms and conditions of a transaction.
Honesty & Integrity
A CPYB maintains the highest standards of professionalism, acting with honesty and integrity.
Trust & Confidence
A CPYB instills confidence, trust and consistency in all transactions involving fellow yacht sales professionals for the benefit of the client.
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Mechanical Disclaimer
Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.
Listing MLS by Yachtr.com
Contact Us
For more information about this yacht please contact Nate Richards.
We look forward to working with you!
East Coast Yacht Sales
106 Lafayette Street
Yarmouth ME 04096 USA
Phone: 1-207-846-4545
Email: ben@ecys.com
Website: https://www.ecys.com
East Coast Yacht Sales is a high quality dealership and brokerage firm with a charismatic team of experienced yacht consultants, service technicians, and support staff who all have a passion for people, boats, and the water. Dealers for Axopar, Targa, Sirena, Boston BoatWorks, & J Boats.
With almost 40 years in the business, East Coast Yacht Sales has grown to eight offices throughout the northeast. You can find ECYS in the same Yarmouth, ME flagship location that was its birthplace, in addition to: Camden and Belfast, ME, Manchester, MA, Newport, RI, Mystic, CT, Atlantic Highlands, NJ and Annapolis, MD.
Nate Richards
106 Lafayette Street
Yarmouth ME 04096 USA
Office: 1-207-846-4545
Cell: 1-207-808-3272
Email: nate@ecys.com
Nate Richards is a seasoned maritime enthusiast who hails from the picturesque shores of Casco Bay, Maine. Growing up surrounded by the sea, particularly on Chebeague Island, Nate developed an intimate understanding of the waters and coastal landscapes of Casco Bay.
His journey into the maritime industry began as a junior sailing instructor, where he honed his skills and passion for teaching others about the art of sailing. From there, Nate obtained his launch driver’s license and spent five years navigating launches along the bay, gaining invaluable experience and knowledge of the local waters.
Seeking to further his education, Nate pursued studies at the University of Maine, where he continued to deepen his understanding of maritime navigation and operations. Following his time at university, Nate ventured into big boat delivery, traversing coastal Maine and expanding his expertise in handling larger vessels.
His career then led him to assume the role of captain and operator of a 60-foot boat, where he demonstrated his leadership and seamanship abilities. Subsequently, Nate served as a dock master in Falmouth for two years, overseeing the bustling activities of a marina and ensuring smooth operations.
Eager to pursue entrepreneurial endeavors, Nate founded and successfully ran his own small business for three years. His entrepreneurial spirit and business acumen further solidified his standing within the maritime community.
Currently, Nate has found his niche as a valuable member of the East Coast Yachts Sales team, leveraging his extensive experience and passion for boating to assist clients in finding their perfect vessel. With his diverse background and intimate knowledge of the coastal regions, Nate continues to excel in his role, providing expert guidance and exceptional service to all his clients.