1998 J Boats 40' (12.19 m) J/120
Seattle, Washington, United States
SHEARWATER has a long history of racing and local cruising around the Pacific Northwest. She has been consistently upgraded and maintained since purchased in 2020 by her current owners with much of the work completed by CSR Marine in Seattle.
- Racing Sailboat
- Sail
- Used
- Diesel
- Other Hull
$ 169,000 USD
€ 154,201 Euros
$ 240,461 CAD
£ 131,226 GBP
Description
Improvements to SHEARWATER over the past four years have improved her performance in racing as well as comfort for cruising.
Under previous ownership, SHEARWATER has traveled across the United States for various races from winning the J/120 class at Key West Race Week and a double handed Pacific Cup in 2014. After being shipped back from Hawaii she has sailed in the PNW double handed or up to a full crew of eight with good results. She is easily sailed to her 2024 ORC and PHRF ratings and is ready for the 2025 season.
Improvements to SHEARWATER are extensive; Most notably are a new BETA Marine diesel engine installed by Access Marine in 2023, full bottom job by CSR marine in 2024, 3-blade max prop, Rod rigging by Ballard Sails and Rigging 2024, running rigging, anchor windlass, and more. Further upgrades are noted in the specifications.
Data Sheet
LOA: 40' (12.19 Meters)
Type: Sail- Used
Year: 1998
Beam: 12'
LWL: 34' 6''
Draft Max: 7'
Fuel Type: Diesel
Hull Material: Other
Bridge Clearance: 56' 9''
Fuel Tank: 27 Gallons (102.21 Liters)
Fresh Water: 75 Gallons (283.91 Liters)
Engines
Engine 1
- Engine Make: Beta
- Engine Model: BV1505
- Engine Year: 2023
- Engine Type: Inboard
- Drive Type: Direct
- Power HP: 81.00
- Power KW: 60.40
- Fuel Type: Diesel
Full Details
Overview
Interior Accommodations
SHEARWATER was finished by J Composites in 1998 after being laid in Rhode Island. She has a covered overhead and more veneered bulkheads than her U.S. finished sister ships do. The two stateroom arrangement will sleep six with her v-berth, quarter cabin and salon settee berths. Storage space is well configured and above average for a vessel of her size and performance characteristics, with hanging lockers in each stateroom and numerous drawers, lockers and other storage areas.
Forward is the V-berth cabin and the head arrangement is on the port side just aft of the cabin. A hanging locker is opposite on the starboard side.
The salon is finished with veneered bulkheads and white vinyl overheads. Centerline is the removable- drop-leaf main salon table, perfect for dinners aboard and easy enough to remove for buoy racing on weekends. Linear settees flank both sides of the cabin with storage outboard
The L-shaped galley is aft on the port side and just at the base of the companionway. There is a 2 burner LPG stove/oven, refrigeration, double basin stainless sink, and storage is outboard. Just aft of the galley is the large storage area accessible through a small door or via the cockpit locker.
On the starboard side, opposite the galley, is the forward-facing navigation station with forward facing seat and table with storage below the hinged table top. There are three drawers and a locker below the forward end of the table.
Just aft is the enclosed quarter-berth stateroom. There is a long quarter-berth with a shelf that stretches the length of the cabin along the hull side. A hanging locker is located forward. Two ports and a small hatch provide ventilation.
Electronics and navigation
- NKE electronics & autopilot
- NKE gyro pilot graphic
- (2) NKE data displays
- NKE Regatta Compass
- NKE autopilot
- (2) NKE autopilot remote 2021
- All NKE electronics inspected and software updates by local NKE agent, 2021
- Uniden VHF w/DSC, 2019
- AIS Transponder & Receiver with WiFi hub, 2016
- Optimizer for sat phone, 2014
- Garmin GPS, 2012
- L&S hydraulic ram with energy save solenoid
Electrical
- Victron battery charger - 2020
- Starter battery, group 24 AGM 800 MCA - 2020
- Lifeline 4D AGM Deep Cycle Battery, 210 AH Marine Flag Terminals - 2021
- Xantrex 1000W Freedom XC Inverter Charger - 12V DC, 120VAC - 2021
- Balmar 120A alternator
- Balmar external regulator
- 2 SunPower 100W Flexible Solar Panels - 2018 (presently in owners storage)
- Victron charge controller- 2019
- LED bow navigation lights - 2020
- LED Tri-Color
- Alpenglow interior lights
- Additional 120v power outlets added
Mechanical and Plumbing
- Beta 38hp - BV1505 installation by Access Marine - 2023
- 3-Blade 17’ Max-Prop- 2023
- Prop shaft replaced, 2012, balanced and aligned with engine repower – 2023
- Engine mounts replaced- 2023
- Stuffing box replaced- 2023
- Most recent full engine service (50 hour) – Gallery Marine – December 2024
- Water heater- 2020
- Wallas diesel forced air heater
- Isotherm refrigeration
- Force 10 stove & oven (2021)
- Aluminum propane tank
- Propane line and fittings replaced with added shutoff switch
- Inline water filter added for galley faucet
- Shower sump pump and automatic switch
- Automatic bilge pump – 2024
- Composting head
- 27 gal fuel
- 75 gal water
Hull and Deck
- Balta Plate bottom paint by CSR – 2024
- Keel re-faired by CSR – 2024
- Deck stiffened around partners & chainplates – 2024
- Bottomed cleaned monthly by a professional diver
- Topsides painted with Alex Seal two-part LPU- 2019
- Maxwell 10 Electric Windlass, with remote - 2021
- Lewmar Claw 44lb. anchor – 100’ of chain & 200’ of rode
- Fortress 21 Race anchor – 25’ chain & 100’ of rode
- Removable anchor roller
- Emergency tiller
- Scanmar SOS emergency rudder
- Dodger with canvas, and window covers
Rigging
- Hall spars aluminum mast, replaced in 2007 (original was damaged during land transport), inspected and rig tuned by Ballard Sails- 2024
- All rod rigging replaced by Ballard Sails- 2024
- Carbon wheel- 2007 (original aluminum wheel was damaged during land transport)
- Main traveler updated- 2020
- Traveler blocks - 2021
- All six Harken winches rebuilt – Ballard Sails - 2021
- New #1 jib halyard – Ballard Sails - 2024
- New #1 spinnaker halyard – Ballard Sails - 2024
- Dyneema main halyard
- Mainsheet – Ballard Sails – 2021
- Genoa Sheets – Ballard Sails – 2021
- Spinnaker Sheets – Ballard Sails - 2021
- Dyneema backstay - 2019
- Check-Stays installed by Ballard Sails - 2021
- Tackline for spinnaker
- Second tackline eye and additional tackline – Ballard Sails - 2021
- Lifelines replaced - 2018
- Lifeline gates installed - 2021
- Garhauer rigid boom vang
Sails
- UK X-Drive main, 2018
- UK Titanium #1 genoa, 2020 – lightly used.
- UK X-Drive #2 genoa, 2018
- UK X-Drive #3 jib, 2018
- Heavy weather #4, dacron
- UK AirX A2 spinnaker, 2018
- Ballard Sails A3, 2021 – lightly used.
- Ballard Sails A4, 2014
- Trysail
- Cruising main
- Doyle Carbon #1 cruising genoa
- Cruising/practice spinnaker
Miscellaneous and Safety
- EPIRB 2024
- Interior cushions
- 2024 PHRF and ORC certificates
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
Contact Us
For more information about this yacht please contact Ryan Helling.
We look forward to working with you!
Swiftsure Yachts
2540 Westlake Avenue North
Suite A
Seattle WA 98109 USA
Phone: 1-206-378-1110
Fax: 1-206-378-1124
Email: info@swiftsureyachts.com
Website: https://swiftsureyachts.com
In 2002 the partners of Swiftsure Yachts joined to create a full service brokerage for sailors buying or selling high quality boats. A team approach, in-depth expertise and exceptional service are the hallmarks of our business plan and are designed to ensure we meet our customers’ expectations.
Ryan Helling
Managing Partner/Broker
2540 Westlake Avenue North
Suite A
Seattle WA 98109 USA
Office: 1-206-378-1110
Fax: 1-206-378-1124
Cell: 1-253-229-4146
Email: ryan@swiftsureyachts.com
With my background in boating, it has always been an easy choice for me to search for a way to make a living in the marine industry. My high school and college summers were spent teaching junior sailing and winters were spent working at a local marina and on the floor of the North Sails loft in Seattle. After graduating from the University of Washington Business School with a concentration in Finance, I furthered my experience in the industry working for the Seattle Boat Show. I enjoy merging my experience in the industry and my passion for boating here at Swiftsure Yachts. Since joining Swiftsure Yachts in 2007, I have been involved in transactions from Sweden to Malaysia and everywhere in between. I hold credentials as a Certified Professional Yacht Broker and licensed California Yacht Broker. I am a member of Seattle Yacht Club and Cruising Club of America and also volunteer my time on the board of directors of The Sailing Foundation with a focus on safety at sea. I am a past board member of the Northwest Marine Trade Association where I chaired the Grow Boating committee.